|
|
Raidho X2t Floorstanding Speakers |
|
€6500 |
- Topology 2,5 way
- Impedance 4 ohm
- Bass Loading Internal vented design. Port in rear
- Drivers 1 x Raidho Ribbon Tweeter
- 2 x 5,25” Raidho Ceramix driver with Tantalum coating
- Crossover Point 130Hz and 3.4 kHz 2nd Order
- Frequency Range 40 Hz – 50 kHz +/-3 dB
- Sensitivity 87dB 2,83 V/m
- Nominal Impedance 2,83 V/m
- Power Requirement 50 -150 Watts
- Finish Piano Black
- Ball-bearing decoupling of the speakers integrated into the feet
- Dimensions WxHxD, mm 300 x 1065 x 490 including feet
- Enclosure WxD, mm 143 x 410
- Weight, kg 23
- Designed and build by hand in-house in Denmark
|
* * *
|
|
CYRUS Mono X 300 Signature Monoblock Power Amplifier |
|
€1800 |
- Cyrus’s Zero Feedback Power amplifier brings inherently natural and high resolution musical reproduction.
- By removing the traditional amplifier ‘global feedback’ loop, sonic improvements are made and our signature sound quality is produced.
- Power output: 319W (into 6 Ohms)
Burst Peak Power: >2000W
- S/N ratio: 116dBA
- THD+N @ 2/3 full power: <0.004%, (1kHz into 8 Ohms), <0.05% (20Hz - 20kHz into 8 Ohms)
- Frequency Response: 0.5Hz – 300Khz (-3dB)
- Slew rate: 700V/S (input filter bypassed)
- Sensitivity for 50W into 8 Ohms: 381mV (RCA input), 775mV (BAL input)
- Sensitivity for 225W into 8 Ohms: 890mV (RCA input), 1.78V (BAL input)
- Input impedance: 47kΩ (RCA), 20kΩ (BAL)
- Chain Output: 890mV (for 890mV RCA or 1.78V BAL input)
- Finish: Brushed black
- Dimensions (H x W x D): 73 x 215 x 360 mm
- Weight: 7.4kg
- Made in UK
|
* * *
|
|
KECES S125 Power Amplifier |
|
€800 |
- Power Output 125W x2 @ 8ohm, 225W x2 @ 4ohm, BTL:360W x1 @ 8ohm,
- Class AB with discrete circuitry
- Current capacity 30 amperes peak per channel
- Power bandwidth 5Hz – 100kHz
- Total harmonic distortion (THD+N) <0.004% at 1kHz A-Weighting
- S/N R 113dB 20Hz-20kHz A-Weighting
- Input sensitivity 1V Input Impedance 38k ohm.
- Power Consumption 500 Watts
- 1 kVA encapsulated toroid power transformer, independent secondary windings for each channel.
- 40,000μF Nichicon audio-grade filter capacitors.
- Heavy-duty 24k gold-plated speaker binding posts.
- Gold-plated RCA input jacks
- Balanced inputs with discrete circuits and XLR connectors.
- All-aluminum chassis, 4mm thick U-shaped frame
- 4mm Aluminum casing effectively eliminates EMI/RFI interference and controls vibrations
- Dimension (WxDxH) 300x220x133mm
- Weight 12 kg
|
* * *
|
|
Rega Valve Isis CD Player |
|
€4500 |
- Rega’s advanced CD technology
- Twin Wolfson DACs
- Rega ‘K-Power’ smoothing capacitors
- Custom designed reference case
- CNC reference remote control
-
Lifetime warranty against manufacture defects
- Digital filter switch (located on back panel) offers three digital filter options: Filter 1 (off position) standard half band digital filter., Filter2 (mid position) minimum phase digital filter, Filter 3 (on position) minimum phase with tailored response.
- The analogue stage is valve based with passive filtering. This stage uses two military specification triple mica 5814A (ECC82/12AU7) triodes
- The output buffer and transformer driver stage uses two ECC88 (6DJ8/6922) triodes
- The overall THD is typically 0.06% being prominently even order, where the 2nd harmonic predominates. This will give the sonic dynamics of the valves without dominating the sonic qualities of the digital section.
- 10 separate power supply regulators are used in the digital circuit. The motor, user interface processor & display also have their own power supply. The digital stage also has its own 50 VA transformer again ensuring galvanic isolation. The mechanism is graded and matched to the servo circuits, to ensure the servo and optical amplifiers are working at their optimum point, improving error correction and playability.
- The USB input uses an isolated double-clocked USB interface,
- The USB benefits once again from galvanic isolation from the main circuitry of the Isis player which eliminates the flow of earth currents between the CD and host computer, and eliminate computer power supply noise
- Power Consumption: 46 W
- W x H x D: 434 x 112 x 350 mm
- Weight: 19.5 kg
- Made in UK
|
* * *
|
|
Naim SuperUniti Integrated Amplifier & Streamer |
|
€1400 |
- Power output: 80W per channel into 8Ω, 120W per channel into 4Ω (0.1% THD both channel driven)
- Frequency response: 10Hz-20kHz, (+0.1/-0.5dB)
- UPnP: LAN &
Wi-Fi (802.11 g or n at 2.4GHz)
- Analogue:
2 x RCA, 1 x front panel 3.5mm jack (combined optical), 1 x DIN
- Analogue Input Sensitivity:
270mV at 47kΩ
- Digital (S/PDIF):
6 x S/PDIF
- 1 x coaxial BNC - up to 24bits/192kHz
- 1 x coaxial RCA - up to 24bits/192kHz
- 3 x optical TOSlink - up to 24bits/96kHz
- 1 x front panel mini-TOSLINK - up to 24/96kHz
- USB:
1 x front panel Type A socket
- Uniti Remote Control
- W x H x D: 432 x 87 x 314 mm
- Weight: 12.8 kg
- Made in UK
|
* * *
|
|
Densen B-130XS Integrated Amplifier & Gizmo remote control |
|
€1500 |
Gizmo remote €120 |
- Power output: 2 x 80W / 8ohm, 2 x 160W / 4ohm
- Frequency response: 2Hz-500kHz
- THD + Noise @ rated output: less than 0.05%
- Analogue In:4 x line inputs + 1 x tape in/output
- Analogue Out: 2 x pre-amp outputs for bi-amp wiring
- Processor-loop for use as power-amp in a home-theater setup
- 200 step relay controlled volumecontrol (0,5 dB steps)
- Custom made 500VA torrodial transformer insures ultra low-noise and a firm grip on speakers
- 60.000 uF capacitor bank made with custom Densen high speed capacitors
- Gizmo Remote Control
- W x H x D: 440 x 64 x 310 mm
- Weight: 13 kg
- Made in Denmark
|
* * *
|
|
Tsakiridis Artemis Plus Tube Power Amplifier |
|
€1400 |
- Power output:
- 2x 45 W Pentode
- 2x 28 W Triode
- Frequency response: 7Hz to 71kHz (-3dB)
- Input sensitivity: 0.52V
- Input Resistance:100 ΚΩ
- W x H x D: 290 x 220 x 445 mm
- Weight: 19 kg
- Dual Mono Construction
- Tubes:
- 4× KT88 (Sonic Frontiers, Russia)
- 4× 12AT7 (Electro-harmonix, Russia)
- Switchable Amount of Feedback (6dB / 9dB)
- Hand Made Ultralinear Multi Layer Output Transformers
- Porcelain Tube Bases
- Made in Greece
|
* * *
|
|
CYRUS DAC XP Signature DAC Preamplifier |
|
€1700 |
- Dual mono DAC cards: true dual mono DAC design improves the focus and the the clarity of the system
- Two entirely separate sections: a true dual mono D/A converter and a fully balanced analogue pre-amplifier.
- Digital Filter Response: Fast or Slow roll-off.
- Phase adjust: Normal or Inverted.
- S/N ratio: 115dBA (PCM in, 0dBFS)
- THD+N: 0.002% (0dBFS)
- Output Impendance: 300Ω
- Analogue Inputs: 200mV / 47k Ω
- Digital Input: 500mV pk-pk 75 Ω
- Digital Output: 500mV pk-pk 75 Ω
- Sample rate tolerance: +/-1 00ppm of 32/44.1 /48kHz and multiples to 192k
- Fixed Out Level: 2.3V
- Preamp Out Level: 4.4V
- Balanced Preamp Out Level: 8.4V
- Dimensions (H x W x D): 73 x 215 x 360 mm
- Finish: Brushed black
- Weight: 6.5kg
- Made in UK
|
* * *
|
|
Tsakiridis Alexander Tube Preamplifier, remote controlled |
|
€1200 |
- Input: 5x RCA
- Output:1x RCA, 1 x XLR and Tape out (1x RCA)
- Frequency Response 5 Hz - 100 KHz (-3dB)
- Harmonic Distortion:
- 0,041% @ 1 Volt/ 40Hz
- 0,040% @ 1 Volt/ 1kHz
- 0,080% @ 1 Volt/ 20kHz
- Signal / Noise Ratio 95 dB
- Input Resistance 47 ΚΩ
- Output Resistance 100 Ω
- Max Output Voltage 20 Volt R.M.S.
- Overload Input Voltage 4 Volt R.M.S.
- W x H x D: 420 x 140 x 320mm
- Weight: 8 kg
- Tubes: 2× 6922 (Siemens NOS)
- Four Independent DC Power Supplies
- Two Independent Power Transformers
- No Feedback Design
- Porcelain Tube Bases
- Gold Plated Input/ Output Connectors
- Remote Controlled
- Made in Greece
|
* * *
|
|
Tsakiridis Alexander Tube Preamplifier, remote controlled |
|
€1100 |
- Input: 4x RCA and 1 x XLR
- Output: 1x RCA, 1 x XLR and Tape out (1x RCA)
- Gain 14 dB
- Frequency Response 5 Hz - 100 KHz (-3dB)
- Total Harmonic Distortion: 0,080%
- Signal / Noise Ratio 90 dB
- Input Resistance 47 ΚΩ
- Output Resistance 800 Ω
- Max Output Voltage 12 Volt R.M.S.
- Overload Input Voltage 4 Volt R.M.S.
- W x H x D: 425 x 115 x 395mm
- Weight: 10 kg
- Tubes: 2× 12AT7 (Electro-harmonix, Russia)
- Four Independent DC Power Supplies
- No Feedback Design
- Porcelain Tube Bases
- Gold Plated Input/ Output Connectors
- Remote Controlled
- Made in Greece
|
|
|